Input Voltage: AC100V~240V, 50/60Hz
Output Voltage: DC18V
Wavelength of Blue Light: 400-460nm
Density of blue light: 300-400mw/cmm²
Whitening time: 10-15 minutes for one time, two or three times for a treatment.
Weight of machine: 27KG
Dimension of frame: Height(480mm), Arm lenght(900mm), Wide(1200mm)
1. The bleaching system should be assembled before using. Please open the package, take out the parts from the package, throw away the protecting glue film.
2. Put the attaching plug of the bleaching system into the power socket, and then open the power switch of the power box(ON), at the same time the screen of the machine will turn on, and it will show every parameter before closing the machine last time.
3. Press the button "TIME+-", the showing time will flashing, then you can adjust time. It will increase or decrease 1 minute one time. the maximum range for the adjusting time is 30 minutes. Final turn "TIME+-" again in order to fix the setting.
4. Press the button "TEMP+-", the showing temperature will flashing, then you can adjust temperature. It will increase or decrease 1 ℃ one time. the maximum range for the adjusting time is 30-40℃. Final turn "TEMP+-" again in order to fix the setting.
5. When you turn of the "AUTO" button, the power will flash, then adjust "TEMP+-", it will increase or decrease 10%. The rang of the output power from 10% to 100%.
6. Press the button "START", the bleaching system will light, and at that time the bleaching system will work according to the setting demand, and the screen will show the left working time and temperature; If you open automatic constant temperature process, machine can work according to what you set temperature auto. The same function also as main frame.
7. Press the button of "AUTO(ON/OFF)", the screen 'AUTO“ will flash, it can be on of off. When "AUTO" is on, can adjust temperature, when off, can adjust power.
8. The "PAUSE" button must work when the LED tube is bright. PAUSE is the pause button. Turn one time this button, whitening working pause, turn again, start to work. The same.
Scan the QR code with your phone, or visit the URL