Specifications
Automatic Frequency trace dental scaler
CE/ISO approved
Provide OEM service
Class of device: Class II equipment, BF type.

Technical Data
Power supply: 220VAC, 230VAC, or 110VAC, 50Hz or 60Hz.
Power consumption: ≤20W
Vibration frequency: 28 kHz-34 kHz
Fuse: 0.5A/250V
Primary vibration excursion of the tip: ≥50uM
Half excursion force: ≥0.5N
Output power: ≤20VA
Overall dimensions: L*W*H = 210x135x77mm
Net weight: 2Kg
Operation: Continuous operation
Water pressure: ≤0.3Mpa
Water flow: 5-100ml/min
Working temperature: 10°C -40°C
Relative humidity: ≤70%

Features
The scaler handpiece is separated, push-pull.
The handpiece can be autoclavable at 135°C, 0.22Mpa, time after time, because the shell is made of heat-resistant plastic.
The power adapt is inside the case, so that the scaler can work immediately by plugging the power. It is convenient to install and move.
However, generally the power adapt of other brand scaler is outside the case, so that it isn’t convenient to install and move.
The transducer inside the handpiece is made of Titanium alloy to ensure sound mechanic function and durability.
The tips are made of high strength stainless steel.
Vibration come from piezo-ceramic, powerful, durable, but a little heat.
Automatic frequency tracing ensure that the machine always works on the best frequency steadily.
Scaler efficiently.
The cord is made of silica gel, soft and durable.
Exquisite outline.
Easy to operate.
Contamination protection degree: Common material; foot pedal is made of drip-proof material (IPX1).
Prohibit operating under such conditions: The inflammable an aesthesia environment, oxygen environment and nitrous oxide environment.